Browse All Grants
15,626 grants found
Showing 12,281 – 12,300 of 15,626 grants
Development of a quality-assured platform with digital tests for industrial engineering upper secondary education
Purpose and goal:To ensure quality of training of welders, an internationally recognized training system (IW) is used. Tests have been on paper and corrected manually, which is tim...
Boosting resource efficiency for circular industry by additive manufacturing
Purpose and goal:The goal of the project is to boost industrial acceptance of additive manufacturing (AM) which enables resource effective and circular approaches. Compared to the...
System for a reuse industry - a transition pathway
Purpose and goal:A key to sustainable change is reduced consumption of products. The long-term goal is to create and facilitate an industry for reuse in sustainable living environm...
Reuse of food waste for construction of fungal membranes and filters for water and air purification
Purpose and goal:Filter and membranes are often produced from fossil-based polymers, and used for air and water purification. Membrane filtration facilities demands frequent membra...
Conversion of Waste to sodium ion batteries anode
Purpose and goal:Sodium-ion batteries (SIBs) have emerged as one of the most promising new rechargeable battery technologies, with the development of high-performance, low-emission...
Electroactive carbon fibers for intelligent recycling of raw materials
Purpose and goal:The project aims to solve the waste treatment problem by changing the waste to wealth based on environmental, strategic, and economic concerns. The purpose is to d...
Closed-loop recycling of wool/synthetic blend textiles into high-end textile fibres
Purpose and goal:By developing technical methods for 1) chemical separation and recycling of textile material blends containing both wool and synthetic fibres, and 2) fibre spinnin...
A position sensing detector for extreme ultraviolet radiation
Purpose and goal: ** Denna text är maskinöversatt **As the wavelength 13.5 nm (EUV) is becoming more common in photolithography processes, it is important for SiTek that its produc...
Front-tracking of dense suspensions using synchrotron imaging
Purpose and goal:Advanced electronics are a prerequisite for modern society, regardless of whether it concerns how we communicate, work, or are entertained. Electronics are becomin...
Unlocking the potential of fly ash as a secondary raw material through the use of LSRI
Purpose and goal:The goal was to increase the potential reuse of resources from waste incineration fly ashes through increased knowledge of the chemical speciations of Zn and Sb in...
Reveal H-induced cracking in duplex stainless steel by neutron and x-ray diffraction and imaging
Purpose and goal:The overall purpose is to develop a sample environment and perform operando time-of-flight neutron imaging and diffraction measurement to reveal local distribution...
Empowering 3D graphene-on-SiC sensors utilizing X-ray based facilities at Max IV Lab Lund
Purpose and goal:The purpose of the project was to use microfabrication techniques to thin SiC cavities before epitaxial growth of graphene and evaluate the quality of the graphene...
Sustainable production of cellulose-based materials for the electrical power transmission equipment
Purpose and goal:The primary objective of the project was to assess the feasibility of utilizing neutron imaging as a means for Hitachi Energy to investigate water and steam transp...
Visualisation in situ of volumetric microwave-convective baking of gluten free bread by time-resolved SRµCT
Purpose and goal:The aim of the project was to increase the competitiveness of Swedish producers of gluten-free bread with improved bread quality, by imaging the structural develop...
In situ monitoring of energy-efficient microwave bread baking vs conventional baking using 4D SRCT
Purpose and goal:One aim was to depen the insights for Swedish baking industry within baking technology with energy-saving potential (based on microwaves), as well as how the choic...
In-situ X-ray diffraction studies for enhanced understanding of the martensite transformation during AM of steels
Purpose and goal:The overall aim of the project, a collaboration between SSAB, Uddeholm and KTH, was to increase the understanding of the microstructure evolution in steels when ex...
Synchrotron X-ray photoemission electron microscopy characterization of alkaline cleaned ZnAlMg coated steel
Purpose and goal:The goal of the project was to better understand the surface chemistry of ZnAlMg coatings used in the automotive industry and the problems that arise when cleaning...
Cow free cheese: Characterization of recombinant casein micell size and microstructure
Purpose and goal:The aim of the project was to generate an increased understanding for how Cassius AB recombinant casein build micelles, and further how they build a cheese type st...
Real time 4D X-ray microtomography Imaging and analysis of water transport mechanisms in sustainable paper straws
Purpose and goal:The aim of this project was to investigate the possibility of using time-resolved synchrotron imaging at TOMCAT, PSI, and ForMAX, MAX IV, to increase the knowledge...
In-situ X-ray analysis for process development of cellulose textile fibers from sustainable raw materials
Purpose and goal:The increasing demand for textiles is a growing environmental problem and there is a great need to replace cotton and synthetic fibers with more sustainable altern...