Browse All Grants
15,626 grants found
Showing 8,841 – 8,860 of 15,626 grants
PyCCS - Effective and climate smart production of biocoal
Purpose and goal:The project´s overall aim to verify the pilot plant showed promising results with high quality of the biochar and particularly interesting results for the reactor´...
Modelling of Sustainable AM Processes for Fabrication in Lightweight Solutions
Purpose and goal:The aim of the project is to mature technology for additive manufacturing of gas turbine components for fossil-free propulsion and energy supply. This is done by i...
Structural wiring
Purpose and goal:The project was started to investigate the conditions for integrating electrical conductors into a structural detail made of composite material or polymer. The goa...
Paradigm shift in thermal technology for forming of lightweight components 2 - ThermLight2
Purpose and goal:The objective of the research project is to develop a novel induction heating technology for heating of lightweight sheet metal in hot stamping. In a feasibility s...
Lightweight solutions for increased sustainability within airport infrastructure II
Purpose and goal:The idea of the project is to reduce the environmental impact during manufacturing, operation and "end-of-life" for a demonstrator for the airport infras...
Substitution of Titanium with a New High Strength Aluminium Alloy
Purpose and goal:The goal was achieved. The new aluminum material was evaluated for its tensile properties at both room temperature and elevated temperatures and compared to the ti...
Low density, wear-resistant Fe-based alloy development (LOWEAR)
Purpose and goal:All objective were fulfilled; we studied the wear mechanism of two existing Mn steels. Accordingly, we implemented the new alloy design strategies to design new al...
Lightweight and Leakproof Electronic Assembly by Friction Stir Welding in BEV
Purpose and goal: The project has successfully achieved the following set research goals in this feasibility project:1. Friction stir welding procedure for Al castings (HPDC and sa...
Lightweight biobased µ-tuned thermally conductive composites
Purpose and goal:The projekt suceeded in making three types of insulating material more thermally conductive with boron nitride and grafene and then substituting a portion of this...
Feasibility study for floating wind power with new lightweight generator
Purpose and goal:The project´s objective was to (i) investigate the potential for floating wind power with Hagnesia´s lightweight generator solution and to (ii) plan for a larger R...
Patchify - Creates new value from discarded garments and products
Purpose and goal: ** Denna text är maskinöversatt **The aim is to create new value from discarded products with a service that simplifies recirculation by connecting handling of pr...
Travel grant 2022 - Events Matchmaking-Sweden Innovation week Brazil and November 10 2022.
Purpose and goal: Create network. Expected results and effects: ** Denna text är maskinöversatt ** Find consortium partners for innovation projects in the framework of the Eureka G...
Travel grant 2022 Matchmaking-Sweden Innovation week Brazil
Purpose and goal:During the meeting with Suzano, Acosense and its solutions were presented to 4 people at Suzano´s division Open Innovation and from a mill. Among other things, the...
White water filtration (Suzano)
Purpose and goal: ** Denna text är maskinöversatt ** After the meeting, the customer wants to proceed with a test unit. Expected results and effects: ** Denna text är maskinöversat...
Voluntary industry agreement for the bus industry on Geofencing
Purpose and goal:Objective: To create the conditions for an industry agreement to use geofencing to achieve common climate, traffic safety and work environment goals. Sub-objective...
Prestudy Roadmapper Tool for KM2030
Purpose and goal: ** Denna text är maskinöversatt **The purpose of the preliminary study was to map, together with the intended users, the possibilities of adapting the service &qu...
Network Medicine to integrate health-related data for better clinical outcomes of CMD
Purpose and goal: ** Denna text är maskinöversatt **The aim of the project was to give the opportunity to create a consortium of Swedish and international researchers able to propo...
Manufacture of plastic parts for facade elements
Purpose and goal: ** Denna text är maskinöversatt **Making a traditional facade more environmentally friendly by replacing fossil-based materials with bio-based materials in two un...
Nordic Seafarm - Prototyping a meat substitute
Nordic SeaFarm wants to investigate the potential of making meat analogues with seaweed as an ingredient. To be able to do this, access to an extrusion machine and competence in th...
Travel grant 2022: Foodtech IL
Purpose and goal:Israel has a leading position in food tech and food innovation, making Israel as a whole, as well as Israeli specific organizations and entrepreneurs, important pa...